The Advantages of Custom Apparel Printing
Thsirt Printing 101: Prepping The Screen For Emulsion
Once you have chosen your frame and mesh and have your screen finished, you will be ready to prep the screen to coat with emulsion. This is a very simple step and only requires that you gently abrade the surface of the mesh with a mild abrasive while cleaning the mesh of any residual grease or dirt. This is normally done in a washout booth where the screen can be easily soaped up with "mesh prep" and thoroughly rinsed off. Now you would let them dry off completely in a dust free environment. This ensures that when the screen is dry it is clean enough to receive the emulsion without complications.
Many would say that you will get so many things if you have considered in doing some customized designs for your t-shirt whenever you buy one. We cannot deny on the validity of this statement as we can see a lot of people who would agree to this specially those who have already done this in the past. More than that, you ought to realize that having a customized t-shirt would give you contented in it which most people are looking for in their print designs. Thus, we can really say that there is a rapid increase of people who are now doing some customization into the prints that their t-shirts have due to the benefits it provides to them. This article will be enumerating on the different advantages that you will get if you are going to consider in having some changes into the print design of your own apparel as most people would do it these days. That is why, you are highly recommended to finish reading this article cause it is full of information that you need in relation to this matter.
Some Facts about the Tshirt Printing Screen
For the purpose of this article we will assume you have a screen made using the correct mesh. No, 110 (43cm) monofilament doesn't work for every job. You need to use the correct mesh count to have a good print. Although mesh count is an entire topic, for now let's assume you are doing a simple three-color print on a light shirt. I would use a 160 (61cm) to 180 (70cm) monofilament mesh with either very well made wood frames that have been purchased with the fabric already attached (prestretched) OR I would use a metal retentionable screen that I had brought to the proper tension a couple of times to get the fabric very tight. I choose the 160 to 180 because I want to lay down a little less ink since this is a multi-color job AND in doing so I will not have to flash cure between colors. In fact I can print this job wet-ink-on-wet-ink. Trust me!
I would also have used a dual-cure photo polymer emulsion as my stencil since they can be used with only a single coat on each side and they hold up well, yet reclaim easily.
The 4 Most Unanswered Questions about Custom Apparel Printing
Many people would claim that the best thing they can get out of this customization assistance is its affordability. If you have already tried in customizing your apparel into something unique, the you can say that this is for a fact. The main reason why they do this is to satisfy their customers prior to the fees they impose to them. On the other hand you will be contented on how they will execute their services for you due to their high credentials on this matter. We cannot deny on this one for the reason that a lot of people would agree to this claim. More than that, they do not forbid you to keep your opinions to yourself as they welcome it for your own satisfaction. For that reason, we cannot deny that it will surely guarantee you that their work output will surely suit your personal taste.
Thsirt Printing 101: Washing Out The Stencil
As soon as you wet the screen you will see a "latent" image of your design begin to emerge in the emulsion. Do not force it, be gentle. The emulsion should start to look lighter and thinner, eventually washing out. You should be able to see this happen and watch closely as you only want to spend the amount of time washing the screen out as is necessary to get the uncured emulsion out of the mesh. Once you can see that your entire stencil area is free of uncured emulsion, go to a wide, sheeting spray action with the water. Rinse both sides with a flooding, sheeting action running down the screen. This will help remove any scum left behind from the slightly under cured emulsion on the ink well side.
The Art of Mastering Custom Apparel Printing
Furthermore, you should know that you will be glad in having their services as they do it as fast as they can. Those who have gone to those professionals can really say that this is true because they can remember their own experiences upon receiving their services in the past. With that being said, you really should consider in having their own services soon if you think your apparel needs some classy makeover as a lot of people have already tried this ad it turned out to be great.